Gateways
Kerlink Wirnet iFemtoCell 915 w/ WiFi Backhaul
Kerlink · KER-PDTIOT-IFE01-US915
Indoor LoRaWAN gateway with WiFi backhaul — drop-in coverage for offices, plants, and pilot sites.
$150single unit
In stock · 194 units
✓Shipping quoted per order — built for B2B procurement
✓Net-30 terms available for enterprise accounts
✓Pre-approved Sourcewell pricing — Contract #041525-SENZ
✓Pre-provisioned for IoTLogIQ — connect to power and you are online
About this product
The Kerlink Wirnet iFemtoCell is the industry's most-deployed indoor LoRaWAN picocell. With dual-band 8-channel reception, WiFi backhaul for sites without Ethernet drops, and Kerlink's hardened embedded Linux, it brings carrier-grade LoRaWAN to any facility in under 15 minutes. Senzary ships every iFemtoCell pre-provisioned for IoTLogIQ — plug in, connect to power, and your sensors are online.
Key specs
- ▸8 RX channels (125 kHz, multi spreading factor), 1 RX channel (250 kHz or 500 kHz, mono spreading factor), 1 FSK RX channel and 1 TX channel
- ▸RX sensitivity: -141 dBm (SF12)
- ▸TX power: configurable from 5 dBm to 27 dBm
- ▸Built-in high-rejection filters
- ▸Listen Before Talk sniffer and spectrum analysis
- ▸Semtech Reference Design v1.5 components
- ▸Backhaul: Ethernet (RJ45) and Wi-Fi with integrated antenna
- ▸Power: 12 VDC through a 2.5 mm / 5.5 mm jack
- ▸SecureBoot with signed firmware and SecureStorage for keys and certificates
- ▸Secured backhaul links (OpenVPN / IPsec)
- ▸Watchdog reboot and recovery to the previous or factory configuration
- ▸Compatible with Kerlink Wanesy Management Center and Wanesy Small Private Network
- ▸CPU: ARM Cortex A9, 256 MB RAM, 8 GB eMMC
- ▸Casing: IP30, for indoor use
- ▸Operating range: -20 °C to +55 °C, 5% to 95% humidity
- ▸Size: 160 x 90 x 35 mm
- ▸Weight: 163 g (gateway), 372 g packed
Volume pricing
Discounts auto-apply at checkout based on quantity.
1–23 units
$150.00
24+ units
Save $50.00 ea
$100.00
Need 100+ units or a custom contract? Book a call →
Recommended additions
Other Senzary engineers commonly add these when deploying the Kerlink Kerlink Wirnet iFemtoCell 915 w/ WiFi Backhaul.
