REAL-TIME ALARMS
AND EVENTS.
IoTLogIQ-911 — built specifically to collect, store, and act on sensor data. From smoke and gas detection to evacuation orchestration. The bridge between sensors, your existing SCADA/Azure/AWS systems, and physical actions like relays, lights, and doors.
DATA ARRIVES. NO ONE ACTS.
Most alarm systems shout into a void. A smoke detector goes off in a remote facility — and the supervisor learns about it on Monday morning. A gas leak triggers an alert — but no automated shutoff, no contractor notification, no muster activation. CrisisIQ closes the loop from sensing to action in under 5 seconds.
SENSING → MONITORING → ACTING.
Sense
Wireless sensors detect smoke, odor, gas, energy anomalies, pulses, environment. LoRaWAN, NB-IoT, BLE, WiFi. PLCs, actuators bridged via data mediation. Indoor and outdoor coverage on one network.
Mediate
IoTLogIQ middleware normalizes data from heterogeneous sensors. Combines wireless sensor data with legacy PLC, MQTT, Modbus, OPC, analog/digital I/O. A data-lake bridge that delivers clean events to consumers.
Monitor
Real-time event stream into SCADA, Azure, AWS, or your in-house dashboards. 10+ pre-built integrations. Configurable severity, escalation chains, and routing rules per event type.
Act
Trigger relays, energize lights, open/close doors. Send SMS, push, email, Teams, Slack notifications. Tied to escalation rules. The same platform sensing the event triggers the response — no human delay.
AUTOMATED INCIDENT RESPONSE.
FROM SENSOR TO PHYSICAL ACTION.
Smoke, Gas, Odor Detection
CO₂, methane, VOC, H₂S, smoke. Wireless. Battery-powered. Mounted in zones legacy systems can't reach — remote pumphouses, offshore deck levels, contractor trailers.
Energy Anomaly Detection
Voltage spike, current excursion, power factor deviation. Energy arrester and protector status. Pulses for grid-tied micro-events. Tied to predictive maintenance for upstream root cause.
Tank Levels & Process Limits
Level sensors for fuel, water, chemicals. Pressure transmitters for process loops. Threshold breach triggers automated alerts AND physical responses (close valves, energize pumps).
Trackers + Environment
Indoor/outdoor asset position correlated with environment readings. Worker badge correlation with gas exposure events. The same platform that knows who's where triggers the response.
Legacy-Greenfield Bridge
Data mediation between LoRaWAN sensors and existing PLC, analog, digital, standalone, MQTT, Modbus, OPC, I/O ports. Alternative to legacy PLC upgrades — extend, don't rip-and-replace.
Acting Layer
Energize lights, trigger relays, open/close doors. SCADA writeback. Webhook to enterprise systems. The acting layer turns the alarm into a physical or digital response in under 5 seconds.
IN PRODUCTION
H₂S detection auto-triggers zone evacuation. Wrong-way driver alerts integrated with badge geofence. Lights and signs activate on event. Real-time crew rotation with automated escalation.
Baghouse failure auto-triggers fan shutdown via SCADA writeback. Stack opacity spike alerts site command in <5 seconds. Compliance officer notified via email + Teams.
Energy anomaly triggers protective relays. Tank level breach triggers automated pumping. Real-time alarms streamed to existing SCADA. Indoor + outdoor coverage on single LoRaWAN network.
COMMON QUESTIONS
DOES IT REPLACE OUR EXISTING SCADA OR ALARM SYSTEMS?+
No. CrisisIQ is additive. It captures wireless sensors and legacy I/O the SCADA doesn't reach, normalizes the data, and writes back into your existing SCADA, Azure, or AWS environments. The SCADA stays. CrisisIQ extends its reach.
HOW FAST IS SENSOR-TO-ACTION?+
Under 5 seconds end-to-end for local events (sensor → gateway → IoTLogIQ → action). Direct edge-to-edge orchestration available for sub-second response in safety-critical loops.
CAN IT DO LOCKOUT / TAGOUT OR EMERGENCY SHUTDOWNS?+
Yes — but with engineering review. CrisisIQ can write back to SCADA or directly to relays via Modbus/OPC. Safety-critical lockout/tagout deployments are typically advisory in v1 (alert humans) and graduate to automated response after operational validation.
WHAT ABOUT FALSE POSITIVES?+
Multi-sensor correlation reduces false positives. A single smoke detector triggers warning; multiple smoke + temperature spike + airflow change triggers action. Configurable per zone, per severity, per asset class.
WHICH INTEGRATIONS ARE PRE-BUILT?+
SCADA (Wonderware, GE iFix, Ignition, AVEVA), cloud (Azure IoT Hub, AWS IoT Core), notification (Teams, Slack, SMS, PagerDuty, OpsGenie), CMMS (Maximo, Fiix, eMaint). Custom integrations via REST or MQTT.
PILOT IN 30 DAYS.
One area. One owner. One problem. Live data on the call, not slides.