Sourcewell Contract #041525-SENZ · Pre-Approved Pricing · No RFP Required · Valid Through July 2029+1-833-SENZARYsales@senzary.comEN | ES
SENZARY.
Anchor 14 · Platform

BROWNFIELD MODERNIZATION.
NO RIP-AND-REPLACE.

Most plants already have SCADA, BACnet, Honeywell, Siemens, and legacy PLCs. IoTLogIQ ingests all of it — alongside new wireless sensors — into one taxonomy. Light up old plants for cents on the dollar of a forklift upgrade.

Book a 20-min call →← Back to Platform
Brownfield integration — legacy + wireless in one view

Legacy systems and new wireless sensors share one taxonomy, one view.

What it is

THE INTEGRATION LAYER YOUR INCUMBENT VENDOR WON'T BUILD.

Most industrial software vendors want you to rip out what you have and start over. Senzary doesn't. IoTLogIQ's Integration Layer reads from your existing SCADA, BACnet, Honeywell, Siemens, Modbus, OPC UA, and legacy PLCs — and surfaces that data inside the same Smart Industry Taxonomy as your new wireless sensors. One pane of glass, two generations of instrumentation.

What we connect to

THE PROTOCOLS WE SPEAK

01

SCADA Systems

Wonderware, Ignition, FactoryTalk, GE iFix, Siemens WinCC, ABB 800xA. Read tags, alarm history, batch records. Surface in IoTLogIQ alongside wireless.

02

BACnet

Native BACnet IP and BACnet MS/TP support. Read HVAC, building automation, energy meters from any BAS. Common for K-12, campus, smart-building.

03

Honeywell + Siemens

Honeywell Experion, Siemens PCS 7, Siemens S7 PLCs. Industrial-grade integration via OPC UA or direct driver. Preserve existing engineering investment.

04

Modbus + OPC UA

Modbus RTU, Modbus TCP, OPC UA — the lingua franca of legacy industrial. Bridge gateways available where IoTLogIQ Edge can't connect directly.

05

Legacy PLCs

Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Siemens S7-300/400, Schneider Modicon. Read tags, raise alarms, trigger IoTLogIQ workflows.

06

Custom Drivers + Workflows

Where a protocol is bespoke, IoTLogIQ Edge runs Node-RED workflows to bridge it. Custom OEM telemetry, proprietary RS-485, serial — all in scope.

Brownfield in action

OLD PLANTS, NEW VISIBILITY

Plant overview brownfield + wireless
Plant overview — brownfield and wireless in one view.
Integration layer architecture
The integration layer — protocols on the left, taxonomy on the right.
Multi-protocol gateway layer
Gateways speak SCADA, BACnet, Modbus, and LoRaWAN simultaneously.
Live today

IN PRODUCTION

IAC Cement (Clarios)
PLC + RotaryIQ + DustIQ

Existing baghouse PLCs surfaced in IoTLogIQ alongside new wireless vibration sensors. One dashboard, two generations of instrumentation.

P&G Cape Girardeau
SCADA + wireless

Brownfield SCADA tags pulled into RotaryIQ for plant-wide rotating equipment health.

AES Panama
Honeywell + EnergyIQ

Grid operations Honeywell DCS data integrated with new wireless sub-meters. One ops view.

Goes well with

RELATED ANCHORS

Industrial Observability

The pane of glass that brownfield data lands in.

Digital Twin Templates

Templates apply equally to wireless and brownfield assets.

Automated Reporting

Compliance reports drawn from both legacy and new instrumentation.

Ready to start?

PILOT IN 30 DAYS.

One area. One owner. One problem. Live data on the call, not slides.

Book a 20-min call →Browse the sensor catalog →
SCADA · Brownfield or Greenfield

REPLACE IT. OR READ AND WRITE TO IT. YOUR CALL.

You already have Wonderware, Ignition, iFIX, FactoryTalk, or a custom Step7 stack. We don't pretend it isn't there. IoTLogIQ either coexists with it over OPC-UA, Modbus, and DNP3 — or replaces it outright with the widget-based HMI shown below. Same platform either way.

Path A · Coexist

Read and write to what you already own.

Your existing SCADA, DCS, or PLC layer stays in place. IoTLogIQ sits alongside as the modernization layer — bidirectional read/write over OPC-UA, Modbus, DNP3, Step7, IEC-61850. Setpoints, valve commands, on/off, alarm acknowledgement all flow both ways.

  • Bidirectional OPC-UA — read tags + write setpoints
  • Modbus function 6 / 16 for register writes
  • Wireless sensors layered on top of legacy I/O
  • Mobile UX + AI / MCP natural-language layer added
  • No rip-and-replace, no plant shutdown
Path B · Replace

Or just replace it — widget-based HMI included.

When the legacy SCADA is end-of-life, single-vendor-locked, or simply not worth maintaining: IoTLogIQ IS the SCADA. Widget-based P&ID schematics, live tags, alarm pane, historian trends, edit mode, multi-tenant. Drilling rig, microgrid, water plant, refinery loop — all built the same way.

  • Drag-and-drop widget HMI (Edit mode)
  • P&ID overlays with live tag values
  • Built-in alarm pane + historian + trends
  • Multi-tenant — one platform, every site
  • No per-tag licensing. No vendor lock-in.
Speaks Every Industrial Protocol
OPC-UA read + writeModbus RS-485 / TCPStep7 / S7-1500DNP3BACnetIEC-61850MQTT bridgeREST / Webhooks
IoTLogIQ Widget-Based HMI · Live in Production
IoTLogIQ widget-based SCADA HMI for a drilling rig — P&ID schematic with live tag overlays, alarms, and historian trends
Drilling Rig · Replacing the Traditional HMI
Rotary speed, tension, drawworks, preventer, mud flow — all on one live P&ID. Tabbed drilldowns and full alarm pane built in.
IoTLogIQ widget-based SCADA HMI for energy management — solar, wind, batteries, inverters, power transformer, generator
Microgrid / Energy SCADA · Same Engine
Solar, wind, batteries, inverters, transformer, generator — one one-line diagram with live values, alarm pane, and edit mode.
Schedule Demo1-833-SENZARY