Featured · Building / Facilities
Milesight UC701 Smart AC Controller
Model UC701 · Region and accessory kit confirmed per project
Monitor room conditions and control existing IR-compatible AC units over LoRaWAN.
UC701 combines infrared AC control with built-in temperature and humidity sensing. Add optional temperature, current, and IR accessories to suit the installation. Senzary scopes the LoRaWAN connection, FacilitiesIQ integration, and commissioning for your site.
Build the right AC kit.
Price, regional model, accessories, lead time, and integration are confirmed in your project quote.
The quote link opens a prepared email. Include your AC model, remote, unit count, and site location.
Technical overview
What you are specifying.
- AC control
- Infrared power, mode, setpoint, and fan commands for compatible AC units
- Built-in sensing
- Temperature −20 to 60°C; relative humidity 0–100% RH
- Temperature accuracy
- ±0.5°C from 0 to 60°C; ±1°C from −20 to 0°C
- Humidity accuracy
- ±3% RH from 40–85% RH; ±5% RH outside that band
- Wireless
- LoRaWAN Class B / Class C; region and network support confirmed for each site
- Configuration
- Milesight ToolBox via Bluetooth; supported remote downlinks
- External interfaces
- One NTC temperature input, one current-transformer input, one IR-emitter input
- Power
- 5V DC / 1A via USB-C; optional three-AA alkaline battery compartment (0–40°C battery operation)
- Enclosure
- IP40; 96 × 48 × 26 mm; indoor, non-condensing deployment
- Local functions
- Weekly schedules, temperature limits, threshold alarms, and elapsed-day filter reminders
Choose the accessories.
- NTC probe: room or outlet-air temperature. Concealed mounting requires this probe and an external IR emitter.
- Current transformer: rough current and running feedback. USB power is recommended for CT deployments.
- WT401 thermostat: local room interaction over Bluetooth.
- Battery compartment: optional three-AA power for sites without a nearby supply. Batteries are separate; battery operation is rated for 0–40°C.
Confirm the fit.
Commission the actual AC and remote combination. A controller acknowledgement does not confirm the AC acted. Validate current and temperature response; current feedback strengthens running checks. The controller estimates energy from runtime and configured power. Add a dedicated energy meter when measured kWh is required.
One NTC input measures one point. Simultaneous supply-and-return temperature measurements need additional sensors. CT installation requires qualified electrical personnel.